Login My cart
READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING YOUR KANGOO JUMPS BOOTS



ADJUSTING THE TENSION BAND (T-Spring) OF MODEL KJ-XR3

KJ-XR3 model is the LATEST KANGOO JUMPS GENERATION. IT'S TENSION BAND DOESN'T NEED TO BE ADAPTED TO THE WEIGHT OF THE USER ANYMORE.


There is however an option, for light weight people who wish a "softer ride" to cut off the central band.







The standard factory fitting usually suits all weights.










Option for light weight people who wish a "softer ride".










Recommended trimming tool: WIRE CUTTERS.






Important: new T-bands are harder (more difficult to compress). After having been compressed completely a few times (while jumping high on one foot at a time, or jogging with big strokes) they will reach their final standard.



ADJUSTING THE TENSION BAND (T-Spring) OF MODEL KJ Pro 7






Use your T-Spring without coil springs for your first workout session.








Assembly of coil springs
can only be performed while TS is disassembled.
Hook on the coil springs into the central holes of the TS.
Bend the TS sufficiently for introducing the 2nd hook.








Recommended trimming tool: WIRE CUTTERS.






Important: new T-bands are harder (more difficult to compress). After having been compressed completely a few times (while jumping high on one foot at a time, or jogging with big strokes) they will reach their final standard.



ADJUSTING THE TENSION BAND (T-Spring) OF MODEL KJ Pro 7



PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING YOUR KJ BOOTS

Important: new T-bands are harder (more difficult to compress). After having been compressed completely a few times (while jumping high on one foot at a time, or jogging with big strokes) they will reach their final standard.

Just as children come in "all shapes and sizes" ... our innovative tension bands are designed to accommodate the complete range of weights. Most users that weigh less than 55 kg (120 lbs.) will bounce property with either "A", "B" or "C" as shown below. As you may need to trim out one or two of the bands, please proceed carefully to avoid damaging the remaining band(s).

It should be noted that coordination, strength, and athletic ability play an equally important role in determining proper adjustme.



(Tension Band A is normally for users weighing around 88-120 Ibs. 40-55 Kg.)

1 - If you weight 40 Kg (88 lbs.) or more, you should start with the original triple band.

2 - If you don't bounce (compress the pring) when jumping high on one foot at a time, cut one band as per B1 or B2.








(Tension Band B1 is normally for users weighing around 84-100 Ibs. 38-46 kg..)

3 - If you weight less than 38 Kg (84 lbs.) you will need to be very careful when considering the band as per B1 In such case begin cutting one band from either side, as shown in B2.








( Tension Band B2 is normally for users Weighing around 66-84 Ibs. 30-38 kg. )

Tension Spring








4- Tension Band C is normally for users weighing around 48-70 lbs. 22-32 Kg.









Recommended trimming tool: WIRE CUTTERS.







As you get more skilled (or heavier) and compress your springs too easily, you should order new tension bands from your dealer.
|
|
|
|
|
|